For The Love of Beads BlogThe adventures of Suzanne, Nibbler, and friends in the world of beads and jewelry making crafts

Hello again!

Before we get started, I completely forgot to mention that we are offering FREE SHIPPING for the holidays so order now!

I hope you enjoyed yesterday’s Christmas Tree tutorial ’cause here we go again! Its time for part 2: Christmas Wreaths!

Materials
- 66 green 18 gauge  3/16″ID anodized aluminum rings
- 5 yellow 3/36″ID anodized aluminum rings for decoration
- 1 red 24 gauge 1/2″ ID anodized aluminum ring (helps hold shape)
- 6″ green cord
- 4 red beads

Step 1:
Close ten green rings. Loop ten more green rings through the closed rings to make ten interlocking pairs as shown.

Step 2:
Connect your pairs together into a long strand. Use three rings to make each connection as shown in the first picture below. Now, add a third ring next to every other interlocking pair to add some stability to the final piece.

Connect the strand to the large ring by looping a single ring through a set of three. Remember this connection is through the connectors, NOT the interlocking pairs, as shown above.

Step 3:
Once your strand of chainmail is connected all the way around the large ring, close the circle with three more rings and connect this set of three rings to the large ring. Add some cord with a few beads to one side and you’re almost done!

Step 4:
Add the small rings as decorations. Remember from the tree tutorial, these small rings only fit around a couple larger rings so you will likely have to force them in between some rings to fit them in.

All done!

Happy holidays!